Baseline-MOCON, Inc. presents the Model 8900 for accurate Ethylene Oxide monitoring.
Surveillance system monitors Ethylene Oxide(EtO) levels providing early warning to potentially hazardous conditions. This allows corrective action to be taken preventing employee exposure due to mechanical or procedural failures.Baseline’s Model 8900 combines the selectivity of gas chromatography and the sensitivity of a Photoionization Detector (PID), providing interference free response to ethylene oxide at below 0.05 ppm. This analytical method is referenced in OSHA’s “Occupational Exposure to Ethylene Oxide; Final Standard” 29 CFR Part 1910.
The system documents exposure levels including; time-weighted averages (TWA), short-term exposure limits (STEL) and instantaneous alarms. Areas that are typically monitored include; EtO Sources – gas storage areas, sterilizer doors, aeration doors, and the General Work Area– decontamination, packaging and preparation and sterile product storage areas.
An integral sampling system expands the analyzers capabilities to monitor 4, 8 or 16 locations. With the addition of the Model 8950 Multipoint Sampler, you can monitor up to 32 locations.
Dealing directly with a manufacturer that has over 20 years of experience providing ambient EtO monitoring systems gives you direct access to product specialists that know their product and your application.
Baseline - MOCON, Inc. offers a variety of system configurations. Let our specialized team assist you in selecting the ideal product for your specific needs.
.jpg)
- Application Note - 8900 Ethylene Oxide
- Application Note - Vinyl Chloride, Ethylene Oxide & Propylene Oxide
- For more information regarding monitoring ethylene oxide, please refer to the regulation,appendix D paragraph E of on the OSHA, (Occupational Safety and Health Administration) web site.
- NIOSH, (Center for Disease Control National Institute for Occupational Safety and Health) Search for ethylene oxide
- Application Request
