Model 9000 Total Hydrocarbon Analyzer
 |
The Model 9000 is based on a FlowGuard controlled flame ionization detector (FID) and has an incredible range from less than 10 ppb on the high sensitivity version to 100% on the percent level version. The analyzer has a generous complement of analog, digital, and logic output capabilities. It can be configured with internal components for a single or multipoint analysis of non-condensing gas samples.
|
Data Sheet - English
Request A Quote
Model 9000 Analyzer - Product Specification
| Sampling: | Internal single or multipoint modules, with or without sample pump(s) for prefiltered (< or = .1 microns), non-condensing samples |
| Detector: | Flame ionization detector (FID) |
| Calibration: | Programmable automatic, or manual (with internal selection valves) |
| MDQ: | Minimum detectable quantity: Low Range (0.01 ppm ), Med Range (0.10 ppm), High Range (10.0 ppm). |
| Range: | Low Range (0-2,000 ppm Methane), Med Range (0-20,000 ppm Methane), High Range (0-100% Methane) |
| Repeatability: | ± 1% Full-scale response |
| Drift: | ± 1% Over 24 hours |
| Response Time: | < 5 Seconds to 90% of final reading |
| Display: | 3.4" x 4.5" graphical display |
| Output: | Analog - 1 programmable 0-20mA or 4-20mA isolated output. Digital - RS-232, Ethernet |
| Relays: | 5 programmable form A relays rated to 3A @ 230V. |
| Alarms: | Multilevel concentration and fault alarms that result in an audible and visually displayed alarm, can be mapped to relays to control external equipment. |
| Physical: | Dimensions: 19.00" W x 14.25" D x 5.25" H (48.26 cm W x 36.195 cm D x 13.335 cm H). Nominal weight: < 20 lb (9.072 kg). |
| Configuration: | Bench-top or rack-mount (19" panel) |
| Gas Specifications: | Support - Hydrocarbon content:<1 ppm required. Air @ approx. 200 cc/min, hydrogen @ approx. 40 cc/min. (Options: H2/N2 or H2/He @ 100 cc/min.) Connections - 1/4" O.D. Tube fitting connectors (1/8", 4 mm, and other options) |
| Power: | 90-230 VAC,, 50/60 Hz, 3A |
| Operating Conditions: | Temperature: 32-104 °F (0-40 °C). Humidity: 0-95%, non-condensing. |
Model 9000 Analyzer - Options & Accessories
| Samplers: | Internal multipoint module, with or without sample pump available in 4-point |
| Enclosures: | General purpose, Wallmount, X-purged or Z-purged |
| Expansion Boards: | Analog - Provides up to 10 additional programmable 4-20 mA outputs, with sample read & hold Relay - Provides up to 10 additional programmable relays |
| Catalysts: | Methanizer for low-level CO/CO2 analysis Oxidizer for methane only analysis |
| Gas Generators: | Zero air or hydrogen |
| Calibration Gas: | Zero and span gases for a variety of applications |
